Electric spindle system

<p style="text-align: center;"><img src="/ueditor/php/upload/image/20210611/1623382009304665.jpg" title="1623382009304665.jpg" alt="5.jpg"/></p><p>The iSpeed5 is a fully tool changeable, high speed electric spindle system. As a 350W (0.5hp) variable speed system, it is available in 60,000rpm or 80,000rpm max. speeds. The controller can run multiple motor spindles at different parameters and fully integrates with a machine tool CNC control. The system eliminates the need for external motor cords or air lines, allowing for continuous lights-out high-speed machining. The motor spindles connect to the controller through a constant clean stop block. The iSpeed5 delivers less than 1?m TIR. Spindles are available in most CAT, BT, and HSK tapers.&nbsp;NSK America Corp.</p><p><br/></p><p>CT metrology system</p><p>New features have been added to the 225kV microfocus X-ray computed tomography (CT) system, including:</p><p>Rotating.Target 2.0: More efficient cooling enables 3x smaller focal spot size for clearer imaging; data quality, image resolution maximized; doubles running time before preventive maintenance is required</p><p>Half.Turn CT: Novel method for nearly halving the angle through which a specimen rotates during the X-ray cycle, speeding the process without losing image quality</p><p><br/></p><p>Motorized focal spot to imager distance (FID) adjustment: No need to increase X-ray power; shorter FID may be selected, giving faster scan times or a higher signal-to-noise ratio when using low-energy X-ray power</p><p>Local.Calibration: Allows rapid, repeatable, automated calibration of voxel size at any CT scan position</p><p>Auto.Filament Control: Controls X-ray source, doubling lifetime of the filament, lowering cost, increasing system uptime without losing microfocus resolution</p><p>Quick.Change plug-and-play filament cups: Easily repeatable process that reduces downtime, eliminates human error</p><p>Nikon Metrology Inc.</p><p><br/></p><p>Hydraulic vise</p><p>The 130mm double-acting hydraulic vise with high holding forces offers quick clamping and repeatability for improved speed and part tolerance. The vise comes with multiple mounting patterns, jaw options, and easily accessible plumbing and maintenance ports.</p><p><br/></p><p>Positioning the jaws just outside the workpiece minimizes travel when clamping, and combined with hydraulic workholding speed, reduces clamping and unclamping operations to 1 second. These repeatable operations lead to measurable machine uptime and productivity increases, especially for high-mix, low-volume manufacturers.</p><p><br/></p><p>Hydraulic pump kits include everything to hook up and control a vise including the compact pump – mounted horizontally or vertically – and a manual or solenoid zero leak valve to control clamping.</p><p><br/></p>